Technical Parameters of Small Tonnage Powder Compacting Press

Item \ Parameters \ Model			FPC-6	FSP-25	FSP-30	FPT-30	FSP-50	FSP-60	FPT-60	FSP-70	FSP-80
Mold Base Configuration			upper-1-lower-2	upper-2-lower-2	upper-2-lower-2	upper-2-lower-2	upper-2-lower-3	upper-2-lower-3	upper-2-lower-3	upper-2-lower-3	upper-2-lower-3
Max Compacting Force		KN	60	250	300	300	500	600	600	700	800
Max Demoulding Force		KN	30	125	150	100	250	300	400	350	400
Maximum Pressure on Middle Mold		KN	40	125	150	150	250	300	300	350	400
Middle Mold Surface Adjustment		mm	±5	±5	±5	±5	±7.5	±7.5	±7.5	±7.5	±7.5
Upper Slider Stroke		mm	80	130	130	90	170	170	170	170	170
Upper Slider Adjustment		mm	40	60	60	40	80	80	80	80	80
Max Powder Filling Depth		mm	60	100	100	50	120	120	120	120	120
Demoulding Stroke		mm	40	65	65	35	80	80	75	80	80
Final Pressurizing Stroke		mm	5	8	8	5	10	10	10	10	10
Under Filling Stroke		mm	5	5	5	5	7.5	7.5	7.5	7.5	7.5
Forming Capacity		SPM	18-48	6-24	6-22	10-40	6-20	6-20	8-24	6-18	6-16
Main Motor Power		KW	3	5.5	5.5	7.5	11	11	15	15	15
Total Weight (Reference)		kg	1000	2800	2850	4000	9000	9000	9500	9000	9000
Dimensions (Reference)	H	mm	1900	3050	3050	2850	4850	4850	4430	4850	4850
	W	mm	1085	1450	1450	2000	2300	2300	2300	2300	2300
	D	mm	1340	1000	1000	1080	1500	1500	1500	1500	1500
Remarks			FSP can be designed H-type fast press and S-type double powder press; Fpt-30 is a fast press; Two structures are available for mold base adjustment: inclined block and thread.